make buildworld broke at fortune

dmesg


Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Fri Mar  8 19:59:46 PST 2002
    root@phobos.theapt.org:/usr/obj/usr/src/sys/PHOBOS
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (503.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x672  Stepping = 2
  Features=0x383f9ff
real memory  = 268419072 (262128K bytes)
avail memory = 257593344 (251556K bytes)
Preloaded elf kernel "kernel" at 0xc03b4000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f0e60
npx0:  $on motherboard
npx0: INT 16 interface
pcib0: on motherboard
pci0: on pcib0
agp0: mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib2: at device 1.0 on pci0
pci1: on pcib2
pci1: at 0.0 irq 11
isab0: at device 4.0 on pci0
isa0: on isab0
atapci0: at device 4.1 on pci0
atapci0: Busmastering DMA not supported
uhci0: port 0xd400-0xd41f irq 14 at device 4.2 on pci0
usb0: on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Optical Mouse, rev 1.10/21.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xd000-0xd03f irq 14 at device 9.0 on pci0
xl0: Ethernet address: 00:60:97:de:ca:be
miibus0: on xl0
nsphy0: on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: port 0xa400-0xa40f,0xa800-0xa803,0xb000-0xb007,0xb400-0xb403,0xb800-0xb807 irq 10 at device 11.0 on pci0
ata2: at 0xb800 on atapci1
ata3: at 0xb000 on atapci1
pcm0: port 0xa000-0xa01f irq 14 at device 13.0 on pci0
pci0: (vendor=0x1105, dev=0x8300) at 14.0 irq 15
pcib1: on motherboard
pci2: on pcib1
orm0: at iomem 0xc0000-0xcb7ff,0xcc000-0xcffff on isa0
fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: at port 0x60,0x64 on isa0
atkbd0: flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: on ppbus0
plip0: on ppbus0
lpt0: on ppbus0
lpt0: Interrupt-driven port
ad5: 39083MB [79408/16/63] at ata2-slave UDMA66
acd0: DVD-ROM at ata3-master using PIO4
acd1: CD-RW at ata3-slave using PIO4
Mounting root from ufs:/dev/ad5s1a

cat 4.x-stable
# $FreeBSD: src/share/examples/cvsup/standard-supfile,v 1.20 2001/09/20 06:45:44 ru Exp $
#
# This file contains all of the "CVSup collections" that make up the
# FreeBSD-current source tree.
#
# CVSup (CVS Update Protocol) allows you to download the latest CVS
# tree (or any branch of development therefrom) to your system easily
# and efficiently (far more so than with sup, which CVSup is aimed
# at replacing).  If you're running CVSup interactively, and are
# currently using an X display server, you should run CVSup as follows
# to keep your CVS tree up-to-date:
#
#	cvsup standard-supfile
#
# If not running X, or invoking cvsup from a non-interactive script, then
# run it as follows:
#
#	cvsup -g -L 2 standard-supfile
#
# You may wish to change some of the settings in this file to better
# suit your system:
#
# host=CHANGE_THIS.FreeBSD.org
#		This specifies the server host which will supply the
#		file updates.  You must change it to one of the CVSup
#		mirror sites listed in the FreeBSD Handbook at
#		http://www.freebsd.org/handbook/mirrors.html.
#		You can	override this setting on the command line
#		with cvsup's "-h host" option.
#
# base=/usr
#		This specifies the root where CVSup will store information
#		about the collections you have transferred to your system.
#		A setting of "/usr" will generate this information in
#		/usr/sup.  Even if you are CVSupping a large number of
#		collections, you will be hard pressed to generate more than
#		~1MB of data in this directory.  You can override the
#		"base" setting on the command line with cvsup's "-b base"
#		option.  This directory must exist in order to run CVSup.
#
# prefix=/usr
#		This specifies where to place the requested files.  A
#		setting of "/usr" will place all of the files requested
#		in "/usr/src" (e.g., "/usr/src/bin", "/usr/src/lib").
#		The prefix directory must exist in order to run CVSup.
# Defaults that apply to all the collections
#
# IMPORTANT: Change the next line to use one of the CVSup mirror sites
# listed at http://www.freebsd.org/handbook/mirrors.html.
*default host=cvsup14.FreeBSD.org
*default base=/usr
*default prefix=/usr
*default release=cvs
*default tag=RELENG_4
*default delete use-rel-suffix
# If your network link is a T1 or faster, comment out the following line.
*default compress
## Main Source Tree.
#
# The easiest way to get the main source tree is to use the "src-all"
# mega-collection.  It includes all of the individual "src-*" collections.
src-all
doc-all release=cvs tag=.
ports-all release=cvs tag=.
www release=cvs tag=.
# These are the individual collections that make up "src-all".  If you
# use these, be sure to comment out "src-all" above.
#src-base
#src-bin
#src-contrib
#src-etc
#src-games
#src-gnu
#src-include
#src-kerberos5
#src-kerberosIV
#src-lib
#src-libexec
#src-release
#src-sbin
#src-share
#src-sys
#src-tools
#src-usrbin
#src-usrsbin
# These are the individual collections that make up FreeBSD's crypto
# collection. They are no longer export-restricted and are a part of
# src-all
#src-crypto
#src-eBones
#src-secure
#src-sys-crypto


cat Make.world
#!/bin/sh
echo "Making World, this may take a while" && \
cd /usr/obj && \
touch blah && \
chflags -R noschg * && \
rm -rf * && \
cd /usr && \
echo "CVSup'ing 4-STABLE" && \
/usr/local/bin/cvsup -g /usr/4.x-stable && \
cd /usr/src && \ 
#make cleandir && \
#make cleandir && \
make buildworld && \
make installworld && \
cd /usr/src && \
make buildkernel KERNCONF=PHOBOS && \
make installkernel KERNCONF=PHOBOS && \
echo "Time to reboot!" 


./Make.world
Making World, this may take a while
CVSup'ing 4-STABLE
Connected to cvsup14.FreeBSD.org
Updating collection src-all/cvs
Updating collection doc-all/cvs
Updating collection ports-all/cvs
Updating collection www/cvs
Finished successfully
 : not found

--------------------------------------------------------------
>>> Rebuilding the temporary build tree
--------------------------------------------------------------
rm -rf /usr/obj/usr/src/i386
mkdir -p /usr/obj/usr/src/i386/usr/bin
mkdir -p /usr/obj/usr/src/i386/usr/lib/compat/aout
mkdir -p /usr/obj/usr/src/i386/usr/games
mkdir -p /usr/obj/usr/src/i386/usr/libdata/ldscripts
mkdir -p /usr/obj/usr/src/i386/usr/libexec/elf
mkdir -p /usr/obj/usr/src/i386/usr/sbin
mkdir -p /usr/obj/usr/src/i386/usr/share/misc
mkdir -p /usr/obj/usr/src/i386/usr/share/dict
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX100-12
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devX75-12
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devascii
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devcp1047
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devdvi
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devhtml
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devkoi8-r
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlatin1
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlbp
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devlj4
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devps
mkdir -p /usr/obj/usr/src/i386/usr/share/groff_font/devutf8
mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mdoc
mkdir -p /usr/obj/usr/src/i386/usr/share/tmac/mm
mkdir -p /usr/obj/usr/src/i386/usr/include/arpa
mkdir -p /usr/obj/usr/src/i386/usr/include/g++/std
mkdir -p /usr/obj/usr/src/i386/usr/include/isc
mkdir -p /usr/obj/usr/src/i386/usr/include/objc
mkdir -p /usr/obj/usr/src/i386/usr/include/protocols
mkdir -p /usr/obj/usr/src/i386/usr/include/readline
mkdir -p /usr/obj/usr/src/i386/usr/include/rpc
mkdir -p /usr/obj/usr/src/i386/usr/include/rpcsvc
mkdir -p /usr/obj/usr/src/i386/usr/include/openssl
mkdir -p /usr/obj/usr/src/i386/usr/include/security
mkdir -p /usr/obj/usr/src/i386/usr/include/ss
ln -sf /usr/src/sys /usr/obj/usr/src/i386

--------------------------------------------------------------
>>> stage 1: bootstrap tools
--------------------------------------------------------------
cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj/usr/src/i386  DESTDIR=  INSTALL="sh /usr/src/tools/install.sh" make -f Makefile.inc1 -DBOOTSTRAPPING  -DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED bootstrap-tools
cd /usr/src/games/fortune/strfile;  make obj;  make depend;  make all;  make DESTDIR=/usr/obj/usr/src/i386 install
/usr/obj/usr/src/i386/usr/src/games/fortune/strfile created for /usr/src/games/fortune/strfile
rm -f .depend
mkdep -f .depend -a      /usr/src/games/fortune/strfile/strfile.c
rcsfreeze: symbolic revision number computed: "C_1"
rcsfreeze: symbolic revision number used:     "-f"
rcsfreeze: the two differ only when rcsfreeze invoked with argument
rcsfreeze: give log message, summarizing changes (end with EOF or single '.')
.
rcs: RCS/*,v: No such file or directory
*** Error code 1

Stop in /usr/src/games/fortune/strfile.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.$